Compact All Purpose Tool Room Cleaning
EB Series | Compact Burn-Off Oven System | EB-13
Compact, General Purpose Plastics Tool Cleaning – Designed for recurring cleaning of smaller injection molding components, extrusion tooling, hot runner parts, fixtures, and mixed maintenance loads.
Bring routine polymer removal in-house with a focused thermal-cleaning system built for smaller heat-compatible metal tooling and production components. The perfect tool room cleaning oven for injection and extrusion molders.
Speak With a System Specialist
Call +1 (908) 229-6335
Compact Burn-Off Oven Purpose Built for Injection Molding & Extrusion Tool Rooms
The EB-13 uses controlled heat to break down polymer, resin, oil, grease, and other combustible organic residue on compatible metal components. Once the processing and cooldown stages are complete, the remaining material is reduced to ash for final cleaning and inspection.
Made for Mixed Tool-Room Loads
Process smaller molds, plates, fixtures, nozzle components, molding hardware, and maintenance parts within one focused in-house cleaning system.
*3D System Model
Built for Smaller Components
A practical option for facilities that regularly clean compact polymer-processing tooling but do not require the chamber capacity of a larger industrial oven.
A Versatile In-House Cleaning System for Injection Molding & Extrusion Tool Rooms
The EB-13 gives tool rooms and maintenance departments greater control over recurring polymer cleaning without relying entirely on extensive hand scraping or outsourced processing. A small burn-off oven system that gets the job done.
Injection Molding Applications
Clean small hot runner assemblies, nozzle tips, and nozzle components
Process compatible molding hardware, plates, fixtures, and maintenance parts
Reduce hardened polymer buildup before inspection, repair, or reuse
Extrusion Die Applications
Clean breaker plates, screen packs, and compatible extrusion components
Process small dies and tooling affected by polymer or resin buildup
Reduce manual scraping and outside-cleaning delays for recurring maintenance loads
Its compact configuration is designed around smaller compatible components and mixed tooling loads, making it a practical option for facilities cleaning nozzle parts, molding hardware, breaker plates, screen packs, small dies, fixtures, and maintenance components.
*Final system selection should account for tooling construction, dimensions, weight, residue type, organic loading, cleaning frequency, available utilities, and allowable processing temperature.
FAQ: EB Series (EB-13)
Compact Design
Mixed Load Capacity
Automated Cycle Control
Learn more about compact in-house thermal cleaning for hot runner components, nozzle parts, molding hardware, extrusion tooling, and mixed tool-room loads.
The EB-13 is designed for smaller, heat-compatible metal tooling and production components affected by polymer and other combustible organic residue. Potential applications include small hot runner assemblies, nozzle tips, nozzle components, injection molding hardware, breaker plates, screen packs, small extrusion dies, fixtures, plates, and maintenance parts.
No. The burner flame does not directly contact the components inside the load chamber. The EB-13 uses controlled heat and limited-oxygen processing to decompose combustible organic residue.
Compatible tooling is loaded after unsuitable seals, electronics, sensors, and temperature-sensitive materials have been removed. The system raises the chamber to programmed operating conditions and uses controlled heat to decompose polymer, resin, grease, oil, and other organic residue.
Some assemblies may be suitable, but each application must be reviewed individually. Electronics, wiring, seals, bearings, sensors, brazed areas, coatings, mixed-material components, and other temperature-sensitive parts may need to be removed before processing.
Built for Everyday Tool Room Use
Bring recurring cleaning of nozzle components, molding hardware, small dies, fixtures, and maintenance parts into your own facility.